Laboratory Products

High-quality, transparent, hard-elastic material for gentle tooth alignment with aesthetic splints in the CA system. Material with original CA labelling stating the thickness: extra soft (0.4 mm), soft (0.5 mm), medium (0.625 mm) and hard (0.75 mm). This product is part of the complete...

Three-layer aligner material with flexible elastomer core in a hard-elastic double shell which is able to maintain a constant force level at a minimal loss of power. The flexible elastomer layer ensures high elasticity and break resistance, while reducing initial force and increasing patient...

Diagnostic testing appliance for getting acquainted with the simple and patient-friendly treatment of snoring and sleep apnoea. Metal-free and easy adjustable trays enable protrusion up to 20 mm, assuring considerable lateral excursion. Comes with upper and lower jaw splint incl. nut, mouth shield, storage box,...

Reusable auxiliary element made of heat-resistant silicone for efficient fabrication of the sticky wax spacer. Makes sure the TAP®-T titan hook runs free in the guiding device in the lower splint. Not for use with TAP® -T XL lower guiding device.

Unique retention and spring force! SCHEU-anchors consist of stainless steel alloys (material DIN no. 1.4301) with excellent resistance to corrosion and oral conditions.

Elliptical, hard stainless steel profile (material DIN no. 1.4310), anatomically curved with stamped retentions.

Made of stainless steel alloy (material DIN no. 1.4301) with excellent resistance to oral conditions and highly-polished surface. From one piece without solder connections for optimum elasticity and stability.   Available in units of 10 or 100 pieces (in pairs 5 / 50 left...

Made of stainless steel alloy (material DIN no. 1.4301) with excellent resistance to oral conditions and highly-polished surface. From one piece without solder connections for optimum elasticity and stability.

Water-based, blue-transparent gel for the insulation of 3D-printed models in the fabrication of removable orthodontic appliances. By forming an even film on the model, an optimal insulating effect is ensured between IMPRIMO® LC printer resins and STEADY-RESIN self-curing resins. Apply thinly with a brush and allow to...

The tray system of the Asiga MAX™ allows for easy changing and refilling of materials. We offer four trays with maximum print volumes of 1l, 2l, 5l or 10l and a maximum fill level of 300 to 400 ml per application. Each tray is...

Light-curing resin, castable and burning out residue-free, for fabrication of dental casting objects, red. Adapted to DLP systems with a light source of 385 nm Density: approx. 1.1 g/ml Viscosity: approx. 0.3 PAS Material hardness after curing: approx. 85 shore D This product is...

Light-curing resin at the base of methacrylate, for fabrication of high-precision transparent occlusal splints and drilling templates. When cured, the resin is characterised by relative flexibility and provides high wearing comfort, reduced fracture susceptibility and excellent polishing properties. Contains no diluting monomers, compatible with...

Light-curing resin at the base of methacrylate for fabrication of high-precision dental models with smooth surfaces. Available in three colours for orthodontic and prosthetic applications, adapted to DLP systems with a light source of 385 nm. Density: approx. 1.1 g/ml Viscosity: approx. 0.7 Pa.s...

Light-curing resin at the base of methacrylate assigned to Class IIa of the MDD destined for fabrication of denture bases, available in three gingiva colour shades. All requirements for dental products relating to water absorption (25.8 µg/mm3) and water solubility (0,41 µg/mm3) according to ISO...

Light-curing resin at the base of methacrylate assigned to Class IIa of the MDD in long-term version – with higher filler content for fabrication of long-term temporaries such as crowns, bridges (with one pontic) and mock-ups. Make sure to pay attention to the adjoining...

Set acc. to Dr. Pablo Echarri for use in the progressive stripping therapy (PST) containing CA Stripping Tools with double-sided diamond coating in five diamond particle sizes. Ensures a very smooth enamel finish using an EVAhandle. Autoclavable. CA Stripping Tools with 90µm diamond particle size (green)...

CA POWER GRIP silicone forms enable the fabrication of individual attachments for the CA CLEAR ALIGNER technology. The set contains nine different moulds that can be filled with light-curing composite for direct application on the prepared tooth as well as two appropriate stainless steel...

Retainer box for up to two CA CLEAR ALIGNER splints. Specific shape to fit easily into purse or luggage. Detachable lid with additional space for expansion key, two ventilation holes.

Transparent plastic buttons allow placing elastics in the treatment of class II and III.

Crystal-clear, fast-curing bonding agent for adhesion of CA plastic buttons on CA splints, can also be used for secure adhesion of screws for Herbst and IST appliances. CA pipettes for precise dosing of adhesive.